Maintenance And Useful Hints - Bartscher GMS600 Manual

6. Maintenance and useful hints

CAUTION!
We recommend to order the maintenance of the device in the professional
service company at least once a year. Works interfering in the device must
be realized by the professional and qualified personnel.
General information
Before any maintenance works or repairs remove the plug from the power supply
socket to disconnect the device.
Belt
Belt does not need adjustments. Generally it should be replaced after 3 to 4 years,
and in case of its damage contact the customer service department.
Feet
Feet may become worn after some time, they should be then replaced to assure
the device stability.
Power cable
Check the power cord regularly for damage. Do not use the appliance if the power
cord is damaged. If the power cable is damaged, have an authorised service center
or qualified electrician replace it.
Cutting disks
Blades of cutting disks may become dull after prolonged use.
Cutting disks DTV, DTV8, DT2, DT3, DT4, DT7, DT9, and PS8, PS10, PS14
must be then replaced with new ones.
In case of disks DF1, DF2, DF4, DF5, DF8, DF10, DF14, and DQ4, DQ8
only blades require replacement.
In both cases contact the customer service department and specify precise
designation and article number of the cutting disks.
- 48 -