Bartscher GMS600 Manual page 45

B
on the chute
Stops the device when the lid is removed (e.g. cutting disk replacement) (fig. 3a),
turning on (with use of pushbutton "I") is possible only when lid is closed and locked
with steel hinges (fig. 3).
Fig. 3 - location of mechanic
protective devices
C
on housing
for stopping the device when container or feeder are not in correct position, turning on
(with use of pushbutton "I") is possible only when container or feeder are in
appropriate position (fig. 4).
Fig. 4 - position of feeder or container allowing for turning on
Lid
Hinges
Fig. 3a - location of electric
protective devices
Sensor
position
- 41 -