Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bartscher 173.195
Summary of Contents for Bartscher 173.195
- Page 1 173.195 173.220 173.250 173.275 173.300 Bedienungsanleitung D/A/CH Elektrische Aufschnittmaschinen Seite 3 bis 19 Instruction manual Electric slicers GB/UK from page 21 to 37 Mode d’emploi Trancheuse électrique F/B/CH de page 39 à page 55 V2/0711 - 1 -...
-
Page 2: Table Of Contents
6. Cleaning and maintenance 6.1 Safety advice 6.2 Cleaning 34-35 6.3 Safety instructions for maintenance 7. Possible Malfunctions 8. Waste disposal Bartscher GmbH Franz-Kleine-Str. 28 D-33154 Salzkotten phone: +49 (0) 5258 971-0 Germany fax: +49 (0) 5258 971-120 - 21 -... -
Page 3: General Information
1. General information 1.1 Information about the instruction manual This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device. -
Page 4: Liability And Warrantees
1.3 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors. -
Page 5: Safety
2. Safety This section provides an overview of all important safety aspects. In addition every chapter provides precise safety advice for the prevention of dangers which are highlighted by the use of the above mentioned symbols. Furthermore, attention should be paid to all pictograms, markers and labels on the device, which must be kept in a permanent state of legibility. -
Page 6: Intended Use
o Children should be observed to ensure that they are not playing with the device. o Preserve this manual safely. When passing on/selling the device to a third party, the manuals must be handed over along with the device. o Every person using the device must act in accordance to the manuals and under consideration of the safety advice. -
Page 7: Delivery, Packaging And Storage
3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. -
Page 8: Technical Data
4. Technical data 4.1 Overview of parts ② ③ ⑤ ① ④ ⑥ ⑬ ⑫ ⑦ ⑪ ⑧ ⑩ ⑨ ① Sharpener ② Knife ③ Knife protective ring ④ Knife cover ⑤ Pusher handle ⑥ Food carriage tray ⑦ Food carriage ⑧... -
Page 9: Technical Specification
ON-/OFF button Green button START Red button STOP 4.2 Technical specifications Description Electric slicers 173.195 173.220 173.250 173.275 173.300 Art. no.: HBS-195 HBS-220A HBS-250A HBS-275A HBS-300A Type: Finish: Eloxal aluminum cover sprayed varnish Power: 120 W 120 W 150 W... -
Page 10: Installation And Operation
5. Installation and operation 5.1 Safety instructions WARNING! Electrical hazard! The device must only be connected to a properly installed single socket with protective contact. Never yank cord to disconnect from outlet. Cable must not touch any hot parts. • See that the cable does not touch any heat sources or sharp edges. -
Page 11: Installation And Connection
WARNING! Hazard via electrical current! The device can cause injuries due to improper installation! Before installation the local power grid specification should be compared with that of the device (see type label). Connect the device only in case of compliance! Take note of the security advice! 5.2 Installation and connection •... -
Page 12: Operating
5.3 Operating ATTENTION! The device can only be used by a qualified operator who is aware of safety issues mentioned in this manual. 1. Clean the device before use (See: Chapter 6.2 Cleaning and maintenance). 2. Before use make sure that all components have Correct stance been assembled correctly. - Page 13 8. Adjust slice thickness: turn the slice thickness adjustment (9) counterclockwise until it reaches the desired position. 9. Turn the device on by pressing the green button START (10). 10. With the carriage handle (7), move it slowly forward and backward. 11.
- Page 14 Knife sharpness 1. If the surface of sliced product becomes frayed or coarse and the cutting operations become cumbersome, the knife is to be sharpened. 2. Clean the knife edge before sharpening. 3. Loosen the fixing screw (a) of the sharpener (1) on the other side of the device.
-
Page 15: Cleaning And Maintenance
WARNING! Possible cuts! Only start the device with the sharpener assembled correctly. 10. In order to ensure it will operate correctly, keep the sharpener in a good condition by cleaning it regularly. 6. Cleaning and maintenance 6.1 Safety advice o Before beginning with repair or cleaning works make sure the device has been disconnected from power socket (pull the power plug!!!) and has cooled down. - Page 16 Knife and knife cover cleaning WARNING! Possible cuts danger! The knife is very sharp, under no circumstances one may touch knife blade with bare hands! Wear protective gloves during knife cleaning in order to avoid possible cuts. o Remove knife cover (4), in order to clean it. Loosen the fixing screw (a) of knife cover (4) on the other side of the device;...
-
Page 17: Safety Instructions For Maintenance
6.3 Safety instructions for maintenance o Check the mains connection cable for damage from time to time. Never operate the device when the cable is damaged. A damaged cable must immediately be replaced by customer service or a qualified electrician to avoid dangers. o In case of damage or malfunction, please contact your stockist or our customer service centre. -
Page 18: Waste Disposal
NOTE! For the disposal of the device please consider and act according to the national and local rules and regulations. Bartscher GmbH Franz-Kleine-Str. 28 D-33154 Salzkotten phone: +49 (0) 5258 971-0 Germany fax:...
Need help?
Do you have a question about the 173.195 and is the answer not in the manual?
Questions and answers