Power Supply; Specifications - Epson T-B Series Manual

3.6 Power Supply

■ There is no power switch on the Manipulator. Right after inserting power plug to
power, the Robot System turns ON.
WARNING
Be careful about electric shock when inserting power plug.

3.6.1 Specifications

Voltage
Phase
Frequency
Momentary Power Interrupt Less than 10 msec.
Rated Capacity
Short-circuit
Current Rating
Maximum Load Current
Peak Current
(When AC power is turned ON)
Leakage Current
Ground Resistance
T-B series Rev.1
T3-B T6-B Manipulator 3. Environments and Installation
Ensure that the available power meets following specifications.
Item Specification
100 to 240 VAC
(Input voltage should be with in ±10 % of the rated voltage.)
Single phase
50/60 Hz
T3-B: 660 VA
T6-B: 1,200VA
5kA
T3-B: 3.3A
T6-B: 6.0A
T3-B: Max. 30A (2 ms or less)
T6-B: Max. 60A (2 ms or less)
Max. 10 mA
TN ground (100 Ω or less)
53