Development Pc And Manipulator Connection - Epson T-B Series Manual

NOTE

(8) After the installation has completed, restart your computer.
NOTE


4.2 Development PC and Manipulator Connection

Connect the development PC and the development PC connection port for connection.
NOTE
- For other details of development PC and Manipulator connection, refer to EPSON RC+ 7.0

User's Guide "PC to Controller Communications Command (Setup Menu)".
- Be sure to install the EPSON RC+7.0 to the development PC first, then connect the development
PC and Manipulator with the USB cable.
T-B series Rev.1
Adobe Reader needs to be installed on your PC in order to view the EPSON RC+
7.0 manuals. If the installer cannot find Adobe Reader on your system, it will be
installed at this time. Follow the instructions in the Adobe installer. Do not restart
the system after the Adobe Reader installation has completed.
The EPSON RC+ 7.0 software installation is now completed.
When installing RC, an error "Cannot create parser instance." may occur.
If the error occurs, uninstall RC+ once and execute Microsoft¥VC151719.exe in the
DVD and re-install RC+.
Installation 4. First Step
(Illustration: T3-B401S)
11