Endress+Hauser Levelflex FMP53 FOUNDATION Fieldbus Operating Instructions Manual page 177

Levelflex FMP53 FOUNDATION Fieldbus
Define access code
Navigation
Description
User entry
Factory setting
Additional information
Device reset
Navigation
Description
Selection
Factory setting
Endress+Hauser
"Administration" submenu
Navigation 
 Setup → Advanced setup → Administration → Def. access code
Define release code for write access to parameters.
0 to 9 999
0
If the factory setting is not changed or 0 is defined as the access code, the parameters
are not write-protected and the configuration data of the device can then always be
modified. The user is logged on in the Maintenance role.
The write protection affects all parameters marked with the
document. On the local display, the
the parameter is write-protected.
Once the access code has been defined, write-protected parameters can only be
modified if the access code is entered in the Enter access code parameter
(→  139).
Please contact your Endress+Hauser Sales Center if you lose your access code.
For display operation: The new access code is only valid after it has been confirmed in
the Confirm access code parameter (→  179).
 Setup → Advanced setup → Administration → Device reset
Select to which state the device is to be reset.
• Cancel
• To fieldbus defaults
• To factory defaults
• To delivery settings
• Of customer settings
• To transducer defaults
• Restart device
Cancel
Setup → Advanced setup → Administration
symbol in front of a parameter indicates that
Operating menu

symbol in this

177