The Control Panel; Keypad Layout; Projector Status Indicators - Digital Projection TITAN sx+-500 User Manual

4. Controlling the projector

The control panel

Keypad layout

The controls on the keypad are identical to those at the top of the remote control,
and are described on the following pages.

Projector status indicators

The indicators on the control panel are as follows:
Power off = NO POWER
green = normal RUNNING mode
Shutter yellow = CLOSED
Error off = NO ERROR
flashing = ERROR (temperature)
IR blue flash = Remote control command received
Lamp 1 off = OFF
red = LAMP ERROR
flashing green/amber = LAMP COOL-DOWN or WARM-UP
Lamp 2 off = OFF
red = LAMP ERROR
flashing green/amber = LAMP COOL-DOWN or WARM-UP
amber = STANDBY mode
green = OPEN
steady = ERROR (voltage)
green = ON (100%) amber = ON (80 - 99%)
green = ON (100%) amber = ON (80 - 99%)
Rev C March 2008
TITAN sx+-500
Digital Projection
page 4.8
User Manual
Notes
Many features are controlled
from the menus using the menu
navigation keys on the remote
control or keypad.
For more information about
using the menus, see later in
this section, Using the menus.
Some of the menu features, for
example brightness, contrast
and input preset operations, can
be accessed directly using the
control keys at the bottom of
the remote control.
Other features, eg zoom and
focus, are controlled using the
control keys at the top of the
remote control and keypad.
For more information about
using the control keys, see later
in this section, Using the
control keys.