Projector Indicators - Digital Projection M-Vision Laser 21000 WU Important Information Manual

Important Information

Projector indicators

TEMP. Off = no problem
Flashing red = temperature error
LIGHT Off = light is switched off
Flashing red (cycle of single flashes) = failed to light up during power
up
Flashing red (cycles of double flashes) = light source failed while
projector is on
On, green = light is switched on
STATUS Off = no error
Flashing red (cycle of single flashes) = cover error
Flashing red (cycles of double flashes) = TEC/Color sensor problem
Flashing red (cycles of four flashes) = fan error
On, red = system error
POWER Off = the projector is switched off
Flashing green = the projector is powering up
Flashing amber = the projector is cooling down to standby mode
Flashing red = the projector is preparing to enter network standby mode
On, green = the projector is switched on
On, amber = the projector is in network standby mode
On, red = the projector is in superECO standby mode
Page 26
Digital Projection M-Vision Laser 21000 WU
Rev A November 2018