1. Fit the projections "a" on the front upper cowl-
ing "1" into the holes "b" in the front lower
cowling "2".
a
1
2. Install the front cowling screws and clamp,
and then tighten the screws to specification.
Front cowling screw
1.8 N·m (0.18 kgf·m, 1.3 lb·ft)
3. Route the front turn signal light lead through
the guides "a" on the front upper cowling and
front lower cowling.
4. Fit the front turn signal light coupler into the
slot "b" in the front upper cowling.
a
a
b
2
b
b
b
GENERAL CHASSIS (2)
4-6