EAM30016
REMOVING THE SEAT
TIP
The sub-seat and the seat are coupled with each
other with a plastic band.
When removing the seat, always remove the
sub-seat beforehand.
1. Remove:
• Sub-seat "1"
Refer to "FUEL TANK CAP" on page 1-23.
2. Remove:
• Seat "1"
EAM30371
REMOVING THE NUMBER PLATE
1. Remove:
• Bolt (number plate)
• Number plate "1"
TIP
• Remove the brake hose "2" from the upper
guide "a" and the lower guide "b" on the num-
ber plate.
• The projection "c" on the number plate is insert-
ed into the front fender. Remove the number
plate by pulling it off the front fender.
1
1
4-4
GENERAL CHASSIS
2 2 2
a a a
1
c
EAM30640
INSTALLING THE SHROUD
1. Install:
• Shroud (left "1"/right)
TIP
Insert the projection "a" on the radiator guard
(left/right) into the hole "b" in the shroud
(left/right), install the shroud, and then secure it
with the bolts.
2 2 2
b b b
b b b
a
1