Yamaha MBK X-MAX 300 2017 Service Manual page 67

1. Rear wheel sensor lead
2. Rear brake hose (hydraulic unit to rear brake
caliper)
A. Route the rear wheel sensor lead through the
guide on the V-belt case air filter element cover.
Position the rearside edge of the tape on the lead
in the area shown in the illustration.
B. Position the grommet on the rear wheel sensor
lead to the holder on the V-belt case air filter
element cover.
C. Route the rear wheel sensor lead to the upward of
the V-belt case air filter element cover rib.
D. Route the rear wheel sensor lead through the
guide on the V-belt case air filter element cover.
Position the inside edge of the tape on the lead in
the area shown in the illustration.
E. Position the rear brake hose (hydraulic unit to rear
brake caliper) so that the projection on the rear
brake caliper contacts the hose.
2-44
CABLE ROUTING