Lubricating The Levers; Checking The Sidestand; Lubricating The Sidestand; Checking The Centerstand - Yamaha MBK X-MAX 300 2017 Service Manual

EAS30648

LUBRICATING THE LEVERS

Lubricate the pivoting point and metal-to-metal
moving parts of the levers.
Recommended lubricant
Silicone grease
EAS30650

CHECKING THE SIDESTAND

1. Check:
• Sidestand operation
Check that the sidestand moves smoothly.
Rough movement → Repair or replace.
EAS30651

LUBRICATING THE SIDESTAND

Lubricate the pivoting point, metal-to-metal mov-
ing parts, and spring contact point of the side-
stand.
Recommended lubricant
Lithium-soap-based grease
EAS30856

CHECKING THE CENTERSTAND

1. Check:
• Centerstand operation
Check that the centerstand moves smoothly.
Rough movement → Repair or replace.
EAS30857

LUBRICATING THE CENTERSTAND

Lubricate the pivoting point, metal-to-metal mov-
ing parts, and spring contact points of the center-
stand.
Recommended lubricant
Lithium-soap-based grease
EAS30652

CHECKING THE SIDESTAND SWITCH

Refer to "CHECKING THE SWITCHES" on
page 8-127.
EAS30653

CHECKING THE FRONT FORK

1. Stand the vehicle on a level surface.
EWA13120
WARNING
Securely support the vehicle so that there is
no danger of it falling over.
2. Check:
• Inner tube
Damage/scratches → Replace.
• Oil seal
Oil leakage → Replace.
PERIODIC MAINTENANCE
3. Hold the vehicle upright and apply the front
brake.
4. Check:
• Front fork operation
Push down hard on the handlebar several
times and check if the front fork rebounds
smoothly.
Rough movement → Repair.
Refer to "FRONT FORK" on page 4-78.
EAS30808
CHECKING THE REAR SHOCK ABSORBER
ASSEMBLIES
The following procedure applies to both of the
rear shock absorber assemblies.
1. Stand the vehicle on a level surface.
EWA13120
WARNING
Securely support the vehicle so that there is
no danger of it falling over.
2. Check:
• Rear shock absorber assembly
Oil leaks → Replace the rear shock absorber
assembly.
Refer to "CHECKING THE REAR SHOCK
ABSORBER ASSEMBLY" on page 4-92.
3. Check:
• Rear shock absorber assembly operation
Push down seat on the vehicle several times
and check if the rear shock absorber assem-
bly rebounds smoothly.
Rough movement → Replace.
Refer to "REAR SHOCK ABSORBER AS-
SEMBLIES AND SWINGARM" on page
4-91.
EAS30655
ADJUSTING THE REAR SHOCK ABSORBER
ASSEMBLIES
The following procedure applies to both of the
rear shock absorber assemblies.
EWA17520
WARNING
• Securely support the vehicle so that there
is no danger of it falling over.
3-17