EAS32353
INSTALLING THE REAR UPPER COWLINGS
The following procedure applies to both of the
rear upper cowlings.
1. Install:
• Rear upper cowling "1"
a. Fit the projection "a" on the rear upper
cowling into the hole "b" in the rear lower
cowling.
b
b. Tighten the rear upper cowling bolt and
screw to specification.
Rear upper cowling bolt
7 N·m (0.7 kgf·m, 5.2 lb·ft)
Rear upper cowling screw
1.8 N·m (0.18 kgf·m, 1.3 lb·ft)
1
a
4-26
GENERAL CHASSIS (8)