Installing The Engine; Connecting The Leads - Yamaha MBK X-MAX 300 2017 Service Manual

EAS30251

INSTALLING THE ENGINE

1. Lubricate:
• Engine bracket bolt "1"
Recommended lubricant
Lithium-soap-based grease
TIP
Apply lithium-soap-based grease to the area "a"
shown in the illustration. Do not apply lithium-
soap-based grease to the threads on the end of
the bolt.
2. Install:
• Engine bracket "1"
(to the engine)
• Engine bracket bolt/nut "2"
TIP
Do not fully tighten the nut.
3. Tighten:
• Engine bracket nut
Engine bracket nut
60 N·m (6.0 kgf·m, 44 lb·ft)
4. Connect:
• Starter motor lead "3"
Starter motor lead screw
3.5 N·m (0.35 kgf·m, 2.6 lb·ft)
5. Install:
• Engine "4"
• Engine mounting bolt/nut (rear side) "5"
• Engine mounting bolt/nut (front side) "6"
TIP
Do not fully tighten the nut.
6. Tighten:
• Engine mounting bolt (rear side)
• Engine mounting bolt (front side)
a
Engine mounting bolt (rear side)
45 N·m (4.5 kgf·m, 33 lb·ft)
Engine mounting bolt (front side)
45 N·m (4.5 kgf·m, 33 lb·ft)
7. Install:
• Rear shock absorber assemblies "7"
Rear shock absorber assembly
bolt
30 N·m (3.0 kgf·m, 22 lb·ft)
Rear shock absorber assembly
bolt
23 N·m (2.3 kgf·m, 17 lb·ft)
TIP
Tighten the rear shock absorber assembly bolts
temporarily, and then tighten them to specifica-
tion.
5
6
1
6
EAS31717

CONNECTING THE LEADS

1. Connect:
• Engine ground lead "1"
Engine ground lead bolt
7 N·m (0.7 kgf·m, 5.2 lb·ft)
TIP
Make sure that the engine ground lead terminal
"a" contacts the stopper "b" on the crankcase.
5-11
ENGINE REMOVAL
7
5
3
6
2
5
4
7
2