Yamaha MBK X-MAX 300 2017 Service Manual page 426

1. Place the smart key "1" that will be registered within 80 cm (31.5 in) "a" of the main switch.
2. Perform steps 1–5 in "SMART KEY SYSTEM EMERGENCY MODE" on page 8-119.
3. While the smart key indicator light " " is on for 10 seconds, push the main switch "1" for 5 seconds
until buzzer sounds once.
4. The smart key indicator light (red) "1" on the new smart key comes on for 10 seconds.
TIP
While the smart key indicator light on the smart key is on, the smart key indicator light " " flashes ac-
cording to the number of currently registered smart keys. (For example, if 5 smart keys are registered,
the indicator light flashes 5 times.)
5. While the smart key indicator light is on for 10 seconds, push the button on the smart key to transmit
a signal from the smart key to the smart key unit.
6. If the smart key is registered successfully, the smart key indicator light " " will come on for 3 sec-
onds, and then the smart key system will turn off.
If the smart key was not registered successfully, the smart key indicator light " " will flash for 3 sec-
onds, and then the smart key system will turn off.
TIP
If this registration procedure is performed for a smart key that is already registered, the smart key indi-
cator light " " will flash for 7 seconds (on for 0.2 second and off for 0.8 second).
a
1
8-121
SMART KEY SYSTEM
1
1