Sumavision EMR3.0 Operating Instructions Manual page 276

2 Digital ENC Card X Video
Y Input Resolution Error
3 Digital ENC Card X DSP
No Response
4 Digital ENC Card X DDR Y
Overflow
«ТВБизнес» - официальный дистрибьютор
Response' status
Triggering:
1) when the video coding
switch is turned on, no
video input is given or the
HD video source is not
supported;
2) Upgrade file and the
board card is in the 'No DSP
Response' status.
Reason:
1) no correct video source is
connected, or 2) it is in the
'No DSP Response' status
Triggering: when one port is
never accessed to
correct input source when
the daughter card
electrified or re-upgraded,
the alarming will be given.
For example, when the
equipment is started after
the power failure, if one port
is never accessed to the
correct input source, the
non-inputting and wrong
resolution warning is given.
If the correct input source is
accessed, the warning will
disappear. If the
source is pulled up again,
only the non-input warning
is given. If the soft restart is
made again with the web,
the wrong resolution
warning is never outputted.
Reason: during the DSP
upgrade process, no normal
work is made.
Triggering: upload
upgrade program to realize
the file system upgrade.
Before finishing the DSP
upgrade, the 'No
Response' warning
displayed.
Reason: DDR overflow
Triggering: one complicated
video source coding code
rate is set to be very low (as
300kbps), the
structure shall choose the
+7-812-600-25-77
after the upgrade.
1) Once the input source
with the correct resolution
is connected, the warning
disappears.
2) The warning disappears
after the upgrade.
the
is
input
Once the upgrade
finished and the normal
work of DSP is made, the
warning disappears.
the
DSP
is
Made the modification to
set a high code rate and
the warning disappears.
GOP
TVBS.RU
is
276