Warning List Of Mpeg2 Sd Aenc Card - Sumavision EMR3.0 Operating Instructions Manual

10.

Warning list of MPEG2 SD AENC Card

Warning display
1 FPGA Configuration
Failure
2 FPGA No Response
3 Video Format Error
4 Video No Input
«ТВБизнес» - официальный дистрибьютор
is greater than 70℃.
Triggering: remove
chassis fan
Warning reason/triggering
condition
Reason: failed
configuration of daughter
card
Triggering condition: FTP
fails to upload the correct
FPGA configuration file.
Reason:
1) FPGA configuration fails
and the logical operation of
daughter card is wrong;
2) The equipment operation
is abnormal. If the restart is
invalid, the hardware may
fail.
Triggering: it is detected
that the status register of
the daughter card logic is
abnormal.
Reason:
1) the format of the inputted
video is invalid;
2) The format of
inputted video is unmatched
with the video format setting
Reason:
1) no video input
2) Invalid video input
+7-812-600-25-77
replace the fan. If the short
circuit is found on the board
the
card, it shall replace the
board card.
Resolution
logic Replace the correct logical
configuration
restart the equipment.
1) Replace the
logical configuration file. It
is unnecessary to restart
the equipment.
2) Return and repair of
equipment
1) Replace the input source
2) Modify the video format
parameter
the
Replace the input source
TVBS.RU
file and
correct
272