Sumavision EMR3.0 Operating Instructions Manual page 143

1
Step 1: click the "Port n" in the "StatMux4 Card" of WEB network management to log
in the port setting page;
Step 2: click the "Config" on the page to log in the setting page;
Step 3: set the "Total Bitrate" and the "Statistic Multiplex Bitrate" of the output port,
select corresponding outputted "Packet Format" and set the "Re-generate PCR" and
"Alarm" function to be on or off.
Step 4: click the "Apply" on the page after setting the parameter to put the setting
parameter into effect.
«ТВБизнес» - официальный дистрибьютор
2
Fig. 5-118 StatMux4 Card Port Config
+7-812-600-25-77
4
3
TVBS.RU 143