Sumavision EMR3.0 Operating Instructions Manual page 257

15 Net Receive
Bitrate Not In Threshold
Range
16 Switch To Backup Net
17 Destination Unresolved
18 Backup Group
Effective Bitrate Underflow
19 Backup Group
Effective Bitrate Overflow
20 Port Backup Group Port
Number Is Not Equal
21 UDP Port Number Exceed
Range authority
«ТВБизнес» - официальный дистрибьютор
0 when inputting the backup
of Ethernet port.
Effective
Reason: the valid code rate
received by Ethernet is
beyond the
threshold
inputting the
Ethernet port.
Reason: the main Ethernet
port is switched to the
backup Ethernet port when
the switching condition is
realized.
Reason: unicast is provided
and the
inaccessible
Port
Reason: the valid code rate
transmitted by the UDP port
during the backup of the
output port is smaller than
the minimum code rate
threshold setting.
Port
Reason: the valid code rate
transmitted by the UDP port
during the backup of the
output port is greater than
the maximum code rate
threshold setting.
Reason: when making the
output port backup, it is
required that the UDP ports
in the master equipment
and the backup equipment
must be
number. If not, the warning
will be given.
Reason: the UDP port to be
added is beyond the UDP
port number authorization
purchased
equipment
network environment and
receiving setting.
Check
transmission
code rate and the environment of
setting when master route or backup
backup of route
Check the abnormality of
main route
Check
target IP is address setting and the
environment of network link
Check
minimum
threshold setting is wrong.
Check
minimum
threshold setting is wrong.
Set the same UDP port
quantity for corresponding
group of master equipment
and
(modify the backup group
consistent in of UDP port)
Purchase
authorization again
with the
+7-812-600-25-77
the front-end
environment
the target IP
whether the
code rate
whether the
code rate
backup equipment
the senior
TVBS.RU 257