Sumavision EMR3.0 Operating Instructions Manual page 162

by this action. The stream received by the input port of the user shall be outputted.
Step 1: Click WEB network management "RF Switch Card" to log in the board card
page;
Step 2: click the "Config" on the page to log in the setting page;
Step 3: click the "Bitrate Check Time" on the page to select the time according to the
real application requirements. The "2s", "1s","1/2s" or "1/4s" is available;
Step 4: click the backup mode option on the page to choose the mode complying with
the real application requirement. It can choose the "Main Priority", "Floating", "One-Way
Switch", "Assign Main" or "Assign Backup" as the backup mode. It is advised that the
"Main Priority" mode shall be set during the normal use.
When the main route is abnormal and the backup route is normal, the "Main Priority"
mode may be switched to the backup route. When the main route is recovered, the
backup route may be switched to the main route.
When one route is abnormal in the "Floating", the route may be switched to another
one.
If the switch is made under the "One-way Switch" mode, it is impossible to switch to
the main route.
«ТВБизнес» - официальный дистрибьютор
2
1
Fig. 5-135 RF Switch Card Parameter Setting
8
6
4
7
+7-812-600-25-77
3
5
TVBS.RU 162