Warning List Of Digital Enc Card - Sumavision EMR3.0 Operating Instructions Manual

3 Analog SD ENC Card X
DSP No Response
4 Analog SD ENC Card X
DDR Y Overflow
13.

Warning list of Digital ENC Card

Warning display
1 Digital ENC Card X Video
Y No Input
«ТВБизнес» - официальный дистрибьютор
never accessed to
correct input source when
the daughter card
electrified or re-upgraded,
the alarming will be given.
For example, when the
equipment is started after
the power failure, if one port
is never accessed to the
correct input source, the
non-inputting and wrong
resolution warning is given.
If the correct input source is
accessed, the warning will
disappear. If the
source is pulled up again,
only the non-input warning
is given. If the soft restart is
made again with the web,
the wrong resolution
warning is never outputted.
Reason: during the DSP
upgrade process, no normal
work is made.
Triggering: upload
upgrade program to realize
the file system upgrade.
Before finishing the DSP
upgrade, the 'No
Response'
warning
displayed.
Reason: DDR overflow
Triggering: one complicated
video source coding code
rate is set to be very low (as
300kbps), the
structure shall choose the
full frame I (it holds to other
GOP structures).
warning will be outputted
after a waiting time (the
detailed time is relevant to
the video source).
Warning reason/triggering
condition
Reason:
1) no correct video source is
connected, or
2) it is in the 'No DSP
+7-812-600-25-77
the after the upgrade.
is
input
Once the upgrade
finished and the normal
work of DSP is made, the
warning disappears.
the
DSP
is
Made the modification to
set a high code rate and
the warning disappears.
GOP
This
Resolution
1) Once the SD video
source is connected, the
warning disappears.
2) The warning disappears
TVBS.RU
is
275