Chapter 5 Operating Methods; Web Network Management; Operating Method - Sumavision EMR3.0 Operating Instructions Manual

Chapter 5 Operating Methods

This chapter mainly introduces the methods for system setting and use of EMR,
which may be helpful for users to know initial knowledge about the system setting and
operation steps of EMR. The system setting includes device IP, user management, factory
reset and restart; and the operating method is composed of input setting, multiplexing
setting and output interface operation.

5.1 Web Network Management

When setting the EMR the first time, searching IP address may be required, which
can be realized through LCD on the front panel of the EMR by pressing the buttons, at this
time, the LCD would display local device IP and subnet mask. Configure the computer IP
to enable it to access the device IP. Enter the IP address of EMR in the IE browser:
http://IP_address/, with the initial username as Admin and password as sumavisionrd. The
network management page is shown as Fig. 5-1 EMR WEB Network Management Page.
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
The browser must support HTML 4.0. Internet Explorer 8.0, Firefox and Chrome
is recommended.
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

5.1.1 Operating Method

EMR is the core head-end access device of digital TV. By configuring different board
cards, users can finish encoding, decoding, QPSK demodulation, DVB-S2 demodulation
and descrambling, QAM demodulation and descrambling, DS3 adaptive input/output,
«ТВБизнес» - официальный дистрибьютор
Fig. 5-1 EMR WEB Network Management Page
+7-812-600-25-77 TVBS.RU 25