Warning List Of Ds3 Adapter Card - Sumavision EMR3.0 Operating Instructions Manual

5. Warning list of DS3 adapter Card

Warning display
1 G.703 RS
Abnormally
2 ASI Input Sync Error
3 G.703 Input Sync Error
4 ASI Input No Effective
Bitrate
5 G.703 Input No Effective
Bitrate
6 G.703 Frame Format Error
«ТВБизнес» - официальный дистрибьютор
Warning reason/triggering
condition
Decode
Reason: the coding function
of DS3 transmitting end is
turned off, the output packet
length is selected to be 204
and the
decoding function is turned
on.
Triggering:
function of DS3 transmitting
end is turned off, the output
packet length is selected to
be 204 and the receiving
end decoding function is
turned on.
Reason: the
multiplexed to the output,
but the ASI input is not
synchronized;
Triggering: use the stream
which has the code rate of
ASI input system and fails in
synchronization
Reason: the
multiplexed to the output,
but the DS3 input is not
synchronized;
Triggering: use the stream
which has the code rate of
DS3 input system and fails
in synchronization
Reason: the ASI input code
rate for opening the switch
ASI input system is 0.
Triggering: pull up the ASI
input
Reason: the DS3 input code
rate for opening the switch
DS3 input system is 0.
Triggering: pull up the DS3
input
Reason: the DS3 input is
switched on and the frame
format of DS3 input stream
is unmatched with the frame
format setting (C-bit and
Resolution
Set the RS coding and
decoding switch of the
input source port and the
receiving port as the same.
receiving end
the coding
port is Check whether the ASI
input source is correct
port is Check whether the DS3
input source is correct
Check whether the ASI
input is abnormal
Check whether the DS3
input is abnormal
If
synchronized,
whether the frame format
setting is set to be the
+7-812-600-25-77
the input is not
check
TVBS.RU 263