Renesas M34286T2-CPE User Manual page 49

M34286T2-CPE User's Manual
(2) Trace point setup dialog box
Opening the trace point setup dialog box
Menu Menu item
Debug Trace Point
1) Setting the trace point dialog box
2) Address event setting window in initial state
R20UT0214EJ0200 Rev.2.00
Sep 16, 2010
Setting the trace point dialog box
Trace point setup dialog box
You can use a combination of address event (A1
or A2) and external trigger event T as a trace
event.
Setting an address event
Click A1 or A2 to select the address event you
want to set.
Setting an external trigger event
You can set edges or pass counts of external
trigger event.
High: Positive edge
Low: Negative edge
Setting an address event
Here, you can select one of three conditions:
Point: At specified address
Range In: In specified address range
Range Out: Outside specified address range
You also can set a pass count.
3. Usage (How to Use the Emulator Debugger)
Function
Page 49 of 70