Specifications - Renesas M34286T2-CPE User Manual

M34286T2-CPE User's Manual

1.3 Specifications

Table 1.6 lists specifications of the M34286T2-CPE.
Table 1.6 Specifications of the M34286T2-CPE
Item
Applicable MCUs
Evaluation MCU
Maximum operating frequency
Applicable target power supply
Basic debugging functions
Real-time trace function
Hardware break function
Time measurement
Coverage
Connection to the user system
(see"2.11 Connecting the User
System")
Power supply for emulator
Host machine interface
*1: Available to connect the host machine that supports USB 2.0. With the USB interface, not all hardware (such as
host machine, USB devices, USB hub) combination will work and guaranteed.
R20UT0214EJ0200 Rev.2.00
Sep 16, 2010
4286 Group
M34286G2GP (mounted in the socket of the emulator)
3.0 V Divided-by 8-mode
Divided-by 4-mode
Divided-by 2-mode
Through mode
3.0 V ±5%
Supplied from emulator only. Cannot be supplied from user system.
- Download
- Software break (max. 8 points, break after execution)
- Program execution/stop (allows free-run execution supporting software breaks)
- Memory reference/setting
- Register reference/setting
- Disassemble display
Recording cycle 32768 cycles
Trace point - 2 address points (range/pass count can be set)
- 1 external trigger point
Trace mode - Before Break mode (Records 32768 cycles before program stops)
- Before Trace mode (Records 32768 cycles before event on)
- About Trace mode (Records 32768 cycles before/after event on)
- After Trace mode (Records 32768 cycles after event on)
Hardware break - 2 address points (range/pass count can be set)
point - 1 external trigger point
Break mode - Address break or trigger break
- Stack over/under flow
- Trace event
- Break at end of trace
- Timer
Time measurement point: 2 address point designation (range can be set)
Resolution: 100 ns
Measurement interval: 8 types
Count source: Emulator timer or MCU cycle
C0 coverage
20-pin standard-pitch connector
DC 5.0 V±5%/2 A externally supplied (prepare a power supply separately)
USB *1
(USB 1.1 full-speed, mini-B standard connector used)
Description
4.0 MHz
2.0 MHz
1. Outline
Page 18 of 70