Converter board for connecting flx160 to 64-pin 0.5-mm-pitch lqfp (6 pages)
Summary of Contents for Renesas M3T-FLX-100NSE
Page 1
On April 1 , 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding.
Page 2
Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific”...
Page 3
(ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. • These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's application;...
Mount an MCU with on-chip flash memory or one-time PROM and the HQPACK100SE (separately available) in that order on the NQPACK100SE on the target system. Before using the M3T-FLX-100NSE, be sure to read "7. Precautions" on page 4. (See Figure 1)
5. Connection Procedure The procedure for connecting the M3T-FLX-100NSE is shown below. (1) Mount the NQPACK100SE on the target system. (2) Attach the YQPACK100SE on the NQPACK100SE. (3) Secure the four corners of the YQPACK100SE with the YQ-GUIDE's. • Do NOT use the screws included with the YQPACK100SE.
• For purchasing the NQPACK100SE, YQPACK100SE, HQPACK100SE, contact the following: Tokyo Eletech Corporation http://www.tetc.co.jp/e_tet.htm • For inquiries about the product or the contents of this manual, contact your local distributor. Renesas Tools Homepage http://www.renesas.com/en/tools Connector pin No. J1-26 J1-27 J1-28...