Renesas M34286T2-CPE User Manual page 25

2. Setup
M34286T2-CPE User's Manual
(3) Using the Internal Oscillator Circuit Bare Board
To use this product at a frequency of your setting, build the desired oscillator circuit on the OSC-2 oscillator circuit
board. Figure 2.4 shows an external view of the OSC-2 oscillator circuit board (bare board) and where connector pins
are located. Figure 2.5 shows the circuitry of the OSC-2 oscillator circuit board (bare board). Use the number of
oscillator circuits recommended by the oscillator manufacturer.
Figure 2.4 External view of the oscillator board (OSC-2) and connector pin assignment
Figure 2.5 Circuit of the oscillator circuit board (OSC-2)
R20UT0214EJ0200 Rev.2.00 Page 25 of 70
Sep 16, 2010