Advertisement
Quick Links
To our customers,
st
On April 1
, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Old Company Name in Catalogs and Other Documents
Renesas Electronics website:
http://www.renesas.com
st
April 1
, 2010
Renesas Electronics Corporation
Advertisement
Related Manuals for Renesas M3T-64DIP-DMS
Summary of Contents for Renesas M3T-64DIP-DMS
- Page 1 On April 1 , 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding.
- Page 2 Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific”...
- Page 3 Converter Board for Connecting 64-pin RSS Type Emulator MCU to 64-pin 0.8mm pitch QFP CAUTION Renesas Tools Homepage http://www.renesas.com/tools Rev.2.00 Aug. 01, 2007 REJ10J0334-0200 M3T-64DIP-DMS If the requirements shown in the "CAUTION" sentences are ignored, the equipment may cause personal injury or damage to the products.
-
Page 4: Package Components
1. Description M3T-64DIP-DMS is a converter board to connect the 64-pin RSS type emulator MCU to the DUMMY64 (not included). Using the DUMMY64, the M3T-64DIP-DMS converts the pin assignments of an emulator MCU for the 64-pin 0.8mm pitch QFP. 2. Package Components... - Page 5 7. External Dimensions of M3T-64DIP-DMS RESET Figure 3 External dimensions of M3T-64DIP-DMS 64DIP-DMS REV.A MADE IN JAPAN RESET * With a 3-pin oscillator used for X1, C1 and C2 are not mounted. (3/4) Symbol Dimension [mm] RESET Xcin Xcout Xout...
- Page 6 • We cannot accept any request for repair. • For inquiries about the product or the contents of this manual, contact your local distributor. Renesas Tools Homepage http://www.renesas.com/tools 8. Correspondence of Connectors J1, J2 and J3 Table 2 lists the correspondence of connectors J1, J2 and J3...