M34286T2-CPE User's Manual
(4) Executing up to the cursor position (Come command)
1) Specifying the Come command
2) After the Come command has finished
R20UT0214EJ0200 Rev.2.00
Sep 16, 2010
3. Usage (How to Use the Emulator Debugger)
Setup procedure for executing the COME
command
The Come command allows you to execute the
program up to the cursor position.
The setup procedure is described below.
(1) Click the line in the program display area at
which you want the program to break.
(2) Click the Come button.
Page 44 of 70