Security - Nexcom ISA 140 User Manual

Chapter 4: BIOS Setup
SATA Configuration
Aptio Setup - AMI
Chipset
SATA Configuration
SATA Controller (s) [Enabled]
Serial ATA Port 0 Empty
Port 0 [Enabled]
Version 2.21.1278 Copyright (C) 2021 AMI
SATA Controller(s)
Enables or disables the SATA controller.
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.

Security

Enable/Disable SATA
Device.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Administrator Password
Select this to reconfigure the administrator's password.
41
Aptio Setup - AMI
Main Advanced Chipset Security
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
Version 2.21.1278 Copyright (C) 2021 AMI
Boot Save & Exit
Set Administrator Password
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
ISA 140 User Manual