Nexcom ISA 140 User Manual page 45

Chapter 4: BIOS Setup
Intel(R) Time Coordinated Computing
Aptio Setup - AMI
Advanced
Intel (R) Time Coordinated Computing
Intel (R) TCC Mode [Enabled]
Version 2.21.1278 Copyright (C) 2021 AMI
Intel (R) TCC Mode
Enable or disable Intel (R) TCC mode. When enabled, this will modify system
settings to improve real-time performance. The full list of settings and their
current state are displayed below when Intel(R) TCC mode is enabled.
.
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
Trusted Computing
This section is used to configure Trusted Platform Module (TPM) settings.
Enable or Disable
Intel(R) TCC mode. When
enabled, this will modify system
settings to improve real-time per-
formance. The full list of settings
and their current state are
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Security Device Support
Enables or disables BIOS support for security device. O.S will not show
Security Device. TCG EFI protocol and INT1A interface will not be available.
SHA-1 PCR Bank
Enables or disables SHA-1 PCR Bank.
SHA256 PCR Bank
Enables or disables SHA256 PCR Bank.
31
Aptio Setup - AMI
Advanced
TPM 2.0 Device Found
Firmware Version: 7.62
Vendor: IFX
Security Device [Enable]
Support
Active PCR banks SHA256
Available PCR banks SHA-1, SHA256
SHA-1 PCR Bank [Disabled]
SHA256 PCR Bank [Enabled]
Pending operation [None]
Platform Hierarchy [Enabled]
Storage Hierarchy [Enabled]
Endorsement [Enabled]
Hierarchy
TPM 2.0 UEFI Spec [TCG_2]
Version
Physical Presence [1.3]
Spec Version
TPM 2.0 [TIS]
InterfaceType
Version 2.21.1278 Copyright (C) 2021 AMI
Enables or Disables
BIOS support for
security device. O.S.
will not show Security
Device. TCG EFI
protocol and INT1A
interface will not be
available.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
ISA 140 User Manual