Save & Exit - Nexcom ISA 140 User Manual

Chapter 4: BIOS Setup
Save & Exit
Aptio Setup - AMI
Main Advanced Chipset Security
Save Options
Save Changes and Reset
Discard Changes and Reset
Default Options
Restore Defaults
Boot Override
UEFI: Built-in EFI Shell
Launch EFI Shell from filesystem device
Version 2.21.1278 Copyright (C) 2021 AMI
Save Changes and Reset
To save the changes and reset, select this field then press <Enter>. A dialog
box will appear. Confirm by selecting Yes.
Discard Changes and Reset
To exit the Setup utility and reset without saving the changes, select this field
then press <Enter>. You may be prompted to confirm again before exiting.
Restore Defaults
To restore the BIOS to default settings, select this field then press <Enter>. A
dialog box will appear. Confirm by selecting Yes.
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
Boot Save & Exit
Reset the system after
saving the changes.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Boot Override
To bypass the boot sequence from the Boot Option List and boot from a
particular device, select the desired device and press <Enter>.
Launch EFI Shell From Filesystem Device
Launches the EFI shell.
43
ISA 140 User Manual