Security - Nexcom NDiS V1000 User Manual

Chapter 4: BIOS Setup

Security

Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Chipset Security
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
HDD Security Configuration:
P0:M.2 (S42) 3TE7
Version 2.20.1273. Copyright (C) 2019 American Megatrends, Inc.
Administrator Password
Select this to reconfigure the administrator's password.
User Password
Select this to reconfigure the user's password.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
Boot Save & Exit
Set Administrator Password
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
HDD Security Configuration
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset
HDD Password Description :
Allows Access to Set, Modify and Clear
Hard Disk User Password
User Password is mandatory to Enable HDD Security.
If the 'Set User Password' option is hidden,
do power cycle to enable the option again.
HDD PASSWORD CONFIGURATION:
Security Supported :
Security Enabled :
Security Locked :
Security Frozen :
HDD User Pwd Status :
HDD Master Pwd Status :
Set User Password
Version 2.20.1273. Copyright (C) 2019 American Megatrends, Inc.
Set User Password
Select this to configure the HDD user security password.
49
Set HDD User Password.
*** Advisable to Power Cycle
System after Setting Hard Disk
Passwords ***.
Discard or Save changes option
in setup does not have any
impact on HDD when password is
set or removed. If the 'Set
HDD User Password' option is
hidden, do power cycle to
enable the option again
Yes
No
No
→←: Select Screen
No
↑↓: Select Item
NOT INSTALLED Enter: Select
+/-: Change Opt.
INSTALLED
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NDiS V1000 User Manual