Security - Nexcom NIFE 200S User Manual

Chapter 4: BIOS Setup
PCI Express Configuration
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Chipset
PCI Express Configuration
PCI Express Port 0 [Enabled]
PCI Express Port 1 [Enabled]
PCI Express Port 2 [Enabled]
PCI Express Port 3 [Enabled]
Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc.
PCI Express Port 0 to PCI Express Port 3
Enable or disable the PCI Express ports 0 to 3 on the chipset.
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.

Security

Enable or Disable the PCI
Express Port 0 in the Chipset.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Administrator Password
Select this to reconfigure the administrator's password.
User Password
Select this to reconfigure the user's password.
66
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Main Advanced Chipset Security
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User Will
have Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc.
Boot Save & Exit
Set Administrator Password
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NIFE 200S User Manual