Security; Save & Exit - Nexcom PEAK 980 User Manual

Chapter 3: BIOS Setup

Security

Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Main Advanced Chipset Boot
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User Will
have Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Administrator Password
Select this to reconfigure the administrator's password.
User Password
Select this to reconfigure the user's password.
Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
Security Save & Exit
Set Administrator Password
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Save & Exit
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Chipset
Main Advanced
Save Options
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Changes
Discard Changes
Default Options
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
UEFI: Built-in EFI Shell
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Save Changes and Exit
To save the changes and exit, select this field then press <Enter>. A dialog
box will appear. Confirm by selecting Yes.
Discard Changes and Exit
To exit the Setup utility without saving the changes, select this field then
press <Enter>. You may be prompted to confirm again before exiting.
Save Changes and Reset
To save the changes and reset, select this field then press <Enter>. A dialog
box will appear. Confirm by selecting Yes.
43
Boot Security
Save & Exit
Exit system setup after
saving the changes.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
PEAK 980 User Manual