Security - Nexcom EBC 358 User Manual

Chapter 3: BIOS Setup

Security

Aptio Setup - AMI
Main Advanced Chipset Security
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
Version 2.22.1282 Copyright (C) 2021 AMI
Administrator Password
Selects this to reconfigure the administrator's password.
User Password
Selects this to reconfigure the user's password.
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
Boot Save & Exit
Set Administrator Password
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Secure Boot
Main Advanced Chipset
Boot Configuration
Bootup NumLock State
Quiet Boot
Boot Option Priorities
Boot Option #1
Version 2.22.1282 Copyright (C) 2021 AMI
Bootup NumLock State
This allows you to determine the default state of the numeric keypad. By
default, the system boots up with NumLock on wherein the function of the
numeric keypad is the number keys. When set to Off, the function of the
numeric keypad is the arrow keys.
Quiet Boot
Enables or disables the quiet boot function.
Boot Option Priorities
Adjust the boot sequence of the system. Boot Option #1 is the first boot
device that the system will boot from, next will be #2 and so forth.
47
Aptio Setup - AMI
Security Boot Save & Exit
Select the keyboard NumLock
state
[On]
[Disable]
[UEFI: Built-in EFI
Shell]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
EBC 358 User Manual