Table of Contents
Advertisement
Industrial Electronic Devices
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses,
IEC61850 and PROFINET.
By Pressing the
"Set
Communication" button from the main window for SW67778
(Fig. 2) the window "Set Communication" appears (Fig. 3).
The means of the fields for "IEC61850 Client" are:
In the fields
"IP
Address" the IP address for IEC61850 side of the converter is
defined;
In the fields
"SubNet
converter is defined;
In the fields "Gateway" the default gateway of the net is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for
going out of the net;
In the field "VLAN" the identifier for the VLAN is defined;
In the field
"Application
The means of the fields for "PROFINET" are:
In the field
"IP
Address" the IP address of the converter is defined;
In the field
"SubNet
Mask" the Subnet Mask of the converter is defined;
In the field "Gateway" the default gateway of the net is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for
going out of the net;
In the field
"Name of
In the fields
"Number Byte
defined;
In the fields
"Number Byte
defined.
ADFweb.com Srl – IT31010 – Mareno – Treviso
Mask" the SubNet Mask for IEC61850 side of the
ID" the Goose identification string is defined.
Station" the name of the PROFINET node is defined;
IN" the number of input byte of the converter is
Out" the number of output byte of the converter is
User Manual IEC61850 Client / PROFINET Slave
Document code: MN67778_ENG
Figure 3: "Set Communication" window
INFO:
www.adfweb.com
Revision 1.000
Page 15 of 31
Phone +39.0438.30.91.31
Advertisement
Table of Contents
