Linear Encoder Manufactured By Sony Manufacturing Systems Corporation (Incremental Type) - Mitsubishi Electric MELSERVO-J3 Series Instruction Manual

3. LOAD SIDE ENCODER

3.2.3 Linear encoder manufactured by Sony Manufacturing Systems Corporation (Incremental type)

(1) Cable structure
Prepare a cable based on the following structure diagram.
Servo amplifier
CN2L
Linear encoder
SL710 PL101-R/RH 1) Connector set
Note. Produce an encoder cable. An optional cable is not provided.
POINT
When turning on the power, turn on the interpolator and then turn on the
servo amplifier. When turning off the power, turn off the servo amplifier and
then turn off the interpolator.
MJ830 or MJ831
2)
1)
Load side encoder cable (Note)
2) Connector for
MR-J3CN2
(Option manufactured
by Mitsubishi Electric
Corporation)
(Refer to section 3.4.)
Interpolator
Cable
Interpolator
(This should be prepared
by the customer.)
Connector: 10114-
3000PE
Shell kit: 10314-52F0-
008 (3M or equivalent)
3 - 10
Linear encoder
SL710 PL101-R/RH
SL710
Head cable
Stabilized power supply
5V (MJ830)
12 to 14V (MJ831)
Head cable
Accessories for linear encoder
Cable Length
PL101-R: 0.3m
PL101-RH: 3m
PL101-
R/RH
Interpolator
(This should be
prepared by the
customer.)
MJ830 or MJ831