Mitsubishi Electric MELSERVO-J3 Series Instruction Manual page 31

1. FUNCTIONS AND CONFIGURATION
(2) For MR-J3-11KB(4)-RJ006 to MR-J3-22KB(4)-RJ006
Removal of the front cover
C)
B)
1) Press the removing knob on the lower side of the
front cover ( A) and B) ) and release the setting
tabs.
2) Press the removing knob of C) and release the
setting tabs.
Reinstallation of the front cover
C)
B)
1) Fit the front cover setting tabs on the sockets of
body cover ( A) to D) ) to reinstall it.
Note 1. The cooling fan cover can be locked with enclosed screws (M4
2. By drilling approximately 4 of a hole on the front cover, the front cover can be locked on the body with an enclosed screw
(M4 40).
A)
D)
A)
3) Pull it to remove the front cover.
(Note 2)
2) Push the front cover until you hear the clicking
noise of the setting tabs.
40).
1 - 18
(Note 1)
(Note 1)
Setting tab