Mitsubishi Electric MELSERVO-J3 Series Instruction Manual page 158

Print Data *Manual Number
Aug., 2009 SH(NA)030056-D Section 2.5 D11 and D12 changed to b contact
Section 3.1 Note 3 added
Linear encoder SH13 deleted(Production discontinuation)
Section 3.2.1 (4) Figure partially changed
(c) 1)
Section 3.2.2 (1) Reference changed from "(5) in this section" to "(4) in this section"
(b)
Section 4.3 Description of "Q170MCPU" and "QD74MH
Section 4.3.2 Description of "Q170MCPU" and "QD74MH
Section 5.3.1 Description of "Function selection C-7" added to No.PC20
Section 5.3.2 "Encoder error 2 (71)" changed to "load side encoder error 2 (71)"
Section 5.3.3 Sentence partially changed
Section 5.3.3 (3) "Full closed loop" changed to "Fully closed loop"
Section 6.1 "Encoder error 2"changed to "Encoder error 2 (During runtime)"
"Display 21 Encoder error 3 (During runtime)" added
Section 6.2 "Encoder error 2"changed to "Encoder error 2 (During runtime)"
"Display 21 Encoder error 3 (During runtime)" added
Chapter 7 (3), (5) "Cooling fan wind direction" changed to "Cooling fan air intake
to (9) (exhaust)"
"Air exhaust (intake)" added
Appendix 1 Description of "Function selection C-7" added to No.PC20
Appendix 4.3 "Cooling fan wind direction" changed to "Cooling fan air intake"
"Air exhaust" added
Appendix 5 "Compliance with the european EC directives" added
Appendix 6 "Compliance with UL/C-UL standard" added
Revision
" added
" added