Table of Contents
Advertisement
DOK-SUPPL*-VDP*80.1***-PR03-EN-P
Rexroth IndraControl VDP 80.1 Machine Operator Panel Operator Display
2
Important Instructions on Use
2.1
Appropriate Use
2.1.1
Introduction
2.1.2
Areas of Application and Use
Bosch Rexroth products represent state-of-the-art development and manufac‐
turing. The products are tested prior to delivery to ensure operating safety and
reliability.
WARNING
The products are intended for use in the industrial sector and can only be used
for the intended purpose. If products are used for any other purpose than the
intended purpose, personal injury and material damages can occur.
In case of damages arising from inappropriate use, Bosch Rexroth
as manufacturer does not assume any warranty, cannot be held
liable and does not compensate for damages. Furthermore, Bosch
Rexroth cannot be held liable for any claims for damages. The user
bears all risks arising from the inappropriate use of the products.
Before using Bosch Rexroth products, ensure that all the prerequisites for ap‐
propriate use of the products are complied with:
●
Anyone using Bosch Rexroth products in any way has to read and under‐
stand the relevant safety instructions and be familiar with the appropriate
use.
●
If the products take the form of hardware, their original state may not be
modified, i.e., no structural changes are permitted. It its not permitted to
decompile software products or to modify the source codes.
●
Do not mount damaged or faulty products or use them in operation.
●
It has to be ensured that the products have been installed as described in
the relevant documentation.
The VDP 80.1 of Bosch Rexroth is an operator and visualization display.
The VDP 80.1 can only be used with the attachments and acces‐
sories specified in this documentation. Components that are not
specified may neither be attached nor connected. The same applies
to cables and wires.
The unit can only be operated with the configurations and compo‐
nent combinations explicitly specified in this documentation and
only with the software and firmware specified in the appropriate
functional description.
Typical area of application of the VDP 80.1:
●
Machine tools
The operator display VDP 80.1 may only be operated under the assembly and
installation conditions, in the specified position of application and under the
listed ambient conditions (temperature, degree of protection, humidity, EMC
etc.) specified in this documentation.
Bosch Rexroth AG
Important Instructions on Use
Personal injury and material damages can re‐
sult from inappropriate use of the products!
7/61
Advertisement
Table of Contents
