Clutch Lever; Shift Pedal - Yamaha Tracer 9 Owner's Manual

This module allows you to set the clock.
When the clock module is selected, the
hours will be highlighted.
Set the hours by rotating the wheel
switch. Push the switch to con rm and
highlight the minutes.
After con rming the minutes, you will
be returned to the top MENU screen.
"SUS. Sensor Calibration"
SUS. Sensor Calibration
Result : . . . . .
Execute
After any service to the rear suspen-
sion, a sensor calibration must be per-
formed using this module.
Select "Execute" and within approx. 10
seconds the result of the calibration
(success/failed) will be displayed.
TIP
When performing the sensor calibra-
tion, place the motorcycle on the cen-
terstand and there should be no weight
on the motorcycle.
"All Reset"
This module resets all settings items
(except the odometers and Clock) to
their default or factory presets.
Select YES to reset all items. After se-
lecting YES, all items will be reset and
the screen will automatically return to
the top MENU screen.
km/h

Clutch lever

1. Clutch lever
Instrument and control functions
All Reset
NO
YES
km/h
EAU12823
1 1
4-21
To disengage the drivetrain from the
engine, such as when shifting gears,
pull the clutch lever toward to the han-
dlebar. Release the lever to engage the
clutch and transmit power to the rear
wheel.
TIP
The lever should be pulled rapidly and
released slowly for smooth shifting.
(See page 6-3.)

Shift pedal

2 2
1. Shift pedal
2. Shift sensor
The shift pedal is located on the left
side of the motorcycle. To shift the
transmission to a higher gear, move
the shift pedal up. To shift the trans-
mission to a lower gear, move the shift
4
EAU12876
1