Vehicle Lights; Replacing The License Plate Light Bulb - Yamaha Tracer 9 Owner's Manual

Periodic maintenance and adjustment
Backup fuse:
7.5 A
Backup fuse 2:
15.0 A
Electronic throttle valve fuse:
7.5 A
5. Insert the fuse puller, and then in-
stall the fuse box cover.
6. Turn the main switch on and turn
on the electrical circuit in question
to check if the device operates.
7. If the fuse immediately blows
again, have a Yamaha dealer
7
check the electrical system.
NOTICE
Do not drive while the fuse box cov-
er is removed.

Vehicle lights

2 2
1. Headlight
2. Auxiliary light
Except for the license plate light bulb,
this model's lights are all LED.
ECA27210
If an LED light does not come on,
check the fuses and then have a
Yamaha dealer check the vehicle. If the
license plate light does not come on,
check and replace the bulb. (See page
7-32.)
NOTICE
Do not af x any type of tinted lm or
stickers to the headlight lens.
7-32
EAU80380
Replacing the license plate
light bulb
1. Remove the bolts securing the li-
cense plate light unit.
1 1
2 2
1. License plate light unit
2. Bolt
2. Pull the license plate light unit sep-
arate from the rear fender. (Rein-
stall the collars if they fall out.)
ECA16581
EAU92581
1 1