Auxiliary Dc Jack; Auxiliary Dc Connectors - Yamaha Tracer 9 Owner's Manual

Instrument and control functions

Auxiliary DC jack

1 1
4
1. Auxiliary DC jack cap
A 12-V accessory connected to the
auxiliary DC jack can be used when the
main switch is on.
NOTICE
The accessory connected to the
auxiliary DC jack should not be used
with the engine turned off, and the
load must never exceed 24 W (2 A),
otherwise the fuse may blow or the
battery may discharge.
To use the auxiliary DC jack
1. Turn the main switch off.
2. Remove the auxiliary DC jack cap.
3. Turn the accessory off.
4. Insert the accessory plug into the
EAU49454
auxiliary DC jack.
1. Auxiliary DC jack
5. Turn the main switch on, and start
the engine. (See page 6-2.)
6. Turn the accessory on.
ECA15432
WARNING
To prevent electrical shock or short-
circuiting, make sure that the cap is
installed when the auxiliary DC jack
is not being used.
4-34
Auxiliary DC connector
This vehicle is equipped with an auxil-
1
iary DC connector. Consult your
Yamaha dealer before installing any
accessories.
EWA14361
EAU70641