Clutch Lever - Yamaha FJ-09 2014 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Select switch " /
This switch is used to perform selec-
tions in the information display and
setting mode display of the multi-func-
tion meter unit.
See "Multi-function meter unit" on
page 4-4 for detailed information.
4
Drive mode switch "MODE"
WARNING
Do not change the D-mode while the
vehicle is moving.
Using this switch changes the drive
mode to "STD", "A", or "B" in the fol-
lowing order:
STD → A → B → STD
The throttle grip must be completely
closed in order to change the drive
mode. (See page 4-16 for an explana-
tion of each drive mode.)
TIP
 The mode is set to "STD" by de-
fault. The mode resets to "STD"
when the key is turned to "OFF".
 The selected mode is shown on
EAU59000
"
the drive mode display. (See page
4-7.)
EAU47496
EWA15341

Clutch lever

1. Clutch lever
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the han-
dlebar grip. To engage the clutch, re-
lease the lever. The lever should be
pulled rapidly and released slowly for
smooth clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion circuit cut-off system. (See page
4-35.)
4-18
EAU12821
1