Yamaha Tracer 9 Owner's Manual page 42

Instrument and control functions
"IND Stop" - the r/min at which the in-
dicator stops ashing can be chosen.
Once selected, rotate the wheel switch
up/down to increase or decrease the
r/min value by increments of 200 r/min.
"IND Stop" is settable between 6200 -
13000 r/min.
4
"Maintenance"
Maintenance
OIL
INTERAVAL 1
INTERAVAL 2
This module allows you to record the
distance traveled between engine oil
changes (use the OIL item), and for two
other items of your choice (use INTER-
VAL 1 and INTERVAL 2).
To reset a maintenance trip meter, se-
lect it and then press and hold the
wheel switch.
TIP
Maintenance item names cannot be
changed.
"Unit"
km/L or L/100km
1000
km
1000
km
1000
km
This module allows you to switch the
display between metric and imperial
km/h
measurement units.
When using kilometers, the fuel con-
sumption units can be changed be-
tween "km/L" or "L/100km". When
using miles, MPG will be available.
Temperature units can be switched
between Celsius and Fahrenheit.
Unit
km or mile
km
L/100km
°C or °F
°C
km/h
4-20
"Brightness"
Brightness
1
This module allows you to adjust the
general brightness level of the display
screens.
Select the desired brightness level by
rotating the wheel switch, and then
press the wheel switch to x the setting
and return to the top MENU screen.
"Clock"
Clock
1 0 0
km/h
0
km/h