Yamaha Tracer 9 Owner's Manual page 36

Table of Contents

Advertisement

Available languages

Available languages

Instrument and control functions
MODE" and "TCS-MODE" cannot
be adjusted.
When
the
warning "
" is on, "SUS-MODE"
cannot be adjusted.
• The previously selected modes
will be displayed when the vehicle
4
power is turned on.
To turn off the traction control system,
select "TCS-MODE" with the "MODE"
switch, then push and hold the MODE
up switch until "OFF" is displayed. To
turn TCS back on, press the MODE
down switch ("TCS-MODE" will return
to its previous setting).
TIP
• When "TCS-MODE" has been set
to "OFF", the TCS, SCS and LIF
systems are all turned off togeth-
er.
• The "TCS-MODE OFF" and "TCS-
MODE M" settings can only be se-
lected
while
stopped.
Clock
The clock uses a 12-hour time system.
See page 4-20 to set the clock.
Quick
equipped)
SCU
trouble
When able to shift, the respective QS
or
When unable to shift, QS
white.
If the QS function is turned OFF, QS
itself is not displayed.
The QS functions can be turned on or
off in the setting MENU. See page
4-18.
TIP
The upshift and downshift functions
are independent and can be activated
separately.
For more information on the QS sys-
tem see "QSS" on page 3-6.
Setting MENU icon " "
Choose this icon and push the wheel
switch to access the settings MENU.
(See page 4-17.)
Grip warmer indicator (if equipped)
the
vehicle
is
The grip warmers can be used when
the engine is running. There are 10
temperature levels. When activated,
the indicator will display the tempera-
ture level from 1 (lowest) to 10 (highest).
shift
indicator
"QS"
turns green.
4-14
(if
To activate the grip warmer, use the
wheel switch to highlight the grip
warmer display with the cursor.
Press the wheel switch inward to se-
lect the grip warmer function.
is
Once selected, rotate the wheel switch
up and down to adjust the temperature
level.
Press the wheel switch inward to con-
rm the temperature level and exit the
grip warmer function.
NOTICE
• Be sure to wear gloves when
using the grip warmers.
• Do not use the grip warmers in
warm weather.
• If the handlebar grip or throttle
grip becomes worn or dam-
aged, stop using the grip warm-
ers and replace the grips.
Seat heater indicator (if equipped)
The seat heater can be used when the
engine is running. There are 10 temper-
ature levels. When activated, the indi-
cator will display the temperature level
from 1 (lowest) to 10 (highest).
ECA17932

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mtt890

Table of Contents