Clutch Lever - Yamaha AG200FEE 2014 Owner's Manual

Horn switch " "
Press this switch to sound the horn.
Light switch " / "
Set the light switch to " " to turn on the
headlight, taillight and meter lighting.
Set the switch to " " to turn off all the
lights.
Engine stop switch " /
Set this switch to " " before starting
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
Start switch " "
Push this switch to crank the engine
with the starter. See page 6-1 for start-
ing instructions prior to starting the en-
gine.
INSTRUMENT AND CONTROL FUNCTIONS
EAU12501

Clutch lever

EAU12582
EAU12661
"
1. Clutch lever
" to
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the handle-
bar grip. To engage the clutch, release
the lever. The lever should be pulled
EAU12713
rapidly and released slowly for smooth
clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the start-
ing circuit
page 4-11.)
EAU35001
1
cut-off system. (See
4-3
1
1. Clutch lever lock
A clutch lever lock is provided to keep
the clutch disengaged. To lock the
clutch lever, push down the clutch lever
lock while holding the clutch lever
pulled towards the handlebar grip. To
release the lever lock, simply pull the
clutch lever.
1
2
3
4
5
6
7
8
9
10
11
12