Table of Contents
Advertisement
9.1.1
Installing Cabling Guide Brackets
Left and Right brackets are marked "L" for left and "R" for right. When installed, make sure
that the grips face out.
The rack-gripping brackets shown, are installed on the 4700 rack's rear rail.
To install the rack-gripping cabling guide brackets:
1. Install the cabling guide brackets at the rear of the rack itself, on the rail, and not on the
4700 chassis. It is not important from the cable management perspective where on the rack
the 4700 is installed.
2. Install the cabling guide brackets in parallel with the 4700 chassis so that each Line Board
lines up with its corresponding hanger on the bracket.
78
System Cabling
Advertisement
Table of Contents
