Removing A Smartli - Huawei SmartLi 2.0 User Manual

SmartLi 2.0
User Manual
Figure 6-4 Connecting control cables
Step 4 On the LCD home screen, choose Settings > System Settings, and set Battery
cabinet quantity to 5.
Step 5 Power on the new SmartLi by referring to
After pressing and holding the POWER ON/OFF button on the BCU of the new
SmartLi for more than 2s, you need to confirm that the Cabinet quantity
mismatch alarm is cleared before switching on the battery circuit breaker.
----End

6.6 Removing a SmartLi

Context
This section describes how to remove a SmartLi by using five cabinets in parallel
as an example. The original system consists of five combined cabinets. Now, you
need to remove SmartLi 3.
Issue 09 (2022-01-30)
NO TE
In this case, the Cabinet quantity mismatch alarm is generated.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
6.1 Connecting the Battery
6 Operations
Supply.
117